1100 Series LC and LC/MS Maintenance Videos 

These innovative video clips can help you to easily perform common maintenance procedures for the Agilent's 1100 Series LC and LC/MS Modules and Systems. The videos explain each maintenance step in detail, including information about necessary tools and parts. All clips are available for download, right click on the link and choose ‘save as’).

System requirements: Windows Media Player 6.4 or above (to download the most recent version see the windows media download center) Please note: best performance for online viewing will be realized using a high-speed Internet connection (minimum 384kbs, e.g. DSL,Cable,LAN). As an alternative, you can download the video files to your hard drive first.
If you have difficulties playing the videos please contact us for help.


Currently available 1100 Series LC and LC/MS maintenance videos:

•  Isocratic Pump
•  Quaternary Pump
•  Binary Pump
•  Standard, Micro and Preparative Autosamplers
•  Well-plate Sampler and Micro Well-plate Sampler
•  Variable Wavelength Detector
•  Diode Array and Multiple Wavelength Detectors
•  Fluorescence Detector
•  LC-MSD


Isocratic Pump

	Exchanging the Active Inlet Valve  - 1:56min - 3.5MB
	Exchanging the Active Inlet Valve Cartridge  - 2:20min - 4.6MB
	Exchanging the Outlet Ball Valve - 1:21min – 3.2 MB
	Exchanging the Purge Valve Frit or the Purge Valve  - 1:27min - 3.5MB
	Removing the Pump Head Assembly  - 1:43min – 4.2 MB
	Exchanging the Pump Seals and Seal Wear-in Procedure - 1:05min - 2.7MB
	Exchanging the Plungers  - 1:03min - 2.6MB
	Reinstalling the Pump Head Assembly  - 1:45min – 4.4MB

top

Quaternary Pump

	Exchanging the Active Inlet Valve  - 1:56min – 4.6MB
	Exchanging the Active Inlet Valve Cartridge  - 2:20min – 5.6MB
	Exchanging the Outlet Ball Valve - 1:21min – 3.2MB
	Exchanging the Purge Valve Frit or the Purge Valve - 1:27min - 3.5MB
	Removing the Pump Head Assembly - 1:43min – 4.2MB
	Exchanging the Pump Seals and Seal Wear-in Procedure  - 1:05min - 2.7MB
	Exchanging the Plungers- 1:03min - 2.6MB
	Reinstalling the Pump Head Assembly - 1:45min – 4.4MB

top

Binary Pump

	Exchanging the Active Inlet Valve - 1:33min - 3.6MB
	Exchanging the Active Inlet Valve Cartridge - 1:55min – 4.6MB
	Exchanging the Outlet Ball Valve Sieve or the Complete Valve - 2:02min – 4.4MB
	Exchanging the Purge Valve Frit or the Purge Valve- 1:27min - 3.5MB
	Exchanging the Solvent Selection Valve - 1:40min – 4.2MB
	Removing the Pump Head Assembly- 1:57min – 4.4MB
	Exchanging the Pump Seals - 1:24min – 3.4MB
	Exchanging the Plungers - 0:38min - 1.6MB
	Reinstalling the Pump Head Assembly - 1:44min – 4.3MB

top

Standard, Micro and Preparative Autosamplers

	Needle Assembly - 2:32min – 6.2MB
	Needle-Seat Assembly  - 1:37min – 4.0MB
	Stator Face - 3:06min – 7.6MB
	Rotor Seal - 4:03min – 10.0MB

top

Well-plate Sampler and Micro Well-plate Sampler

	Removing the Needle Assembly  - 2:07min - 4.9MB
	Installing the Needle Assembly  - 4:22min – 10.5MB
	Removing the Needle Carrier Assembly  - 1:35min – 4.0MB
	Installing the Needle Carrier Assembly  - 2:04min – 5.0MB
	8A Samplers - 2:16min - 4.5MB
	Stator Face - 3:13min – 7.5MB
	Rotor Seal  - 3:47min – 9.1MB
	Metering Seal and Plunger  - 3:36min – 8.7MB
	Removing the Loop Capillary  - 3:32min - 7.1MB
	Peristaltic Pump  - 1:25min - 3.5MB

top

Variable Wavelength Detector

	Exchanging a Lamp - 2:05min - 4.6MB
	Exchanging a Flow Cell - 1:41min – 4.1MB
	Repairing the Flow Cells - 3:28min – 8.5MB
	Using the Cuvette Holder - 1:23min - 3.5MB

top

Diode Array and Multiple Wavelength Detectors

	Exchanging a Lamp - 1:25min – 3.4MB
	Exchanging a Flow Cell - 2:02min - 4.8MB
	Repairing the Standard or Semi-Micro Flow Cell - 3:00min – 7.4MB
	Cleaning or Exchanging the Holmium Oxide Filter - 2:25min - 5.8MB
	Cleaning or Replacing Coupling Lens Assembly - 2:32min - 6.4MB
	Cleaning or Replacing Cell Support Window - 2:34min – 6.4MB

top

Fluorescence Detector

	Exchanging a Flow Cell - 2:54min – 6.1MB
	How to use the Cuvette - 1:13min – 3.0MB

top

LC-MSD

	Opening the Analyzer - 1:25min – 3.3MB
	Closing the Analyzer - 1:51min - 3.9MB
	Replacing the Electron Multiplier Horn - 0:54min – 2.2MB
	Cleaning the High Energy Dynode - 4:51min - 10.0MB
	Checking the Foreline Pump Fluid Level - 0:41min - 1.5MB
	Adding Foreline Pump Fluid - 0:50min – 2.0MB
	Replacing the Foreline Pump Fluid - 1:57min - 4.7MB
	Converting from Electrospray to APCI - 1:53min – 4.5MB
	Converting from APCI to Electrospray - 1:59min – 4.7MB
	Cleaning the Electrospray Spray Chamber - Daily - 2:16min - 4.9MB
	Cleaning the Electrospray Spray Chamber - Weekly - 3:41min – 8.6M
	Replacing the Electrospray Nebulizer Needle - 6:01min – 14.8MB
	Adjusting the Electrospray Nebulizer Needle - 1:34min - 3.7MB
	Reinstalling the Electrospray Nebulizer - 0:55min – 2.1MB
	Cleaning the APCI Spray Chamber - Daily - 2:45min – 6.1MB
	Cleaning the APCI Spray Chamber - Weekly - 3:50min – 8.9MB
	Replacing the APCI Nebulizer Needle - 4:43min – 11.5MB
	Adjusting the APCI Nebulizer Needle - 1:37min - 3.8MB
	Reinstalling the APCI Nebulizer - 0:37min - 1.4MB
	Cleaning the Corona Needle - 1:19min - 2.7MB
	Replacing the Corona Needle - 1:10min - 2.7MB
	Removing the Capillary - 0:47min - 1.8MB
	Cleaning the Capillary - 1:55min – 4.5MB
	Reinstalling the Capillary - 0:55min – 2.1MB
	Removing the Desolvation Assembly - 1:18min – 3.0MB
	Cleaning Skimmer 1 - 0:34min - 1.4MB
	Reinstalling the Desolvation Assembly - 1:06min - 2.8MB
	Checking Calibrant Levels - 0:24min - 0.9MB
	Refilling a Calibrant Bottle - 1:25min - 2.9MB
	Flushing the Calibrant Delivery System - 1:36min - 3.6MB
	Checking for Leaks - 2:33min - 5.8MB

top



As always, Agilent's Technical Support Team is available to answer any questions you may have regarding installation or maintenance of Agilent products.