Select a Country or Area
|
Contact Us
Products & Services
Technical Support
Industries
Buy
About Agilent
Go to Part Number Search
Home
>
Technical Support
>
FAQs
>
Liquid Chromatography
>
Hardware
>
1200 Series LC Hardware
Register
|
Login
Frequently Asked Questions
Downloads and Utilities
Education & Events
Frequently Asked Questions
DNA MicroArrays
Gas Chromatography
Lab-on-a-Chip
Life Sciences Informatics
Liquid Chromatography
Mass Spectrometry
Networked Data Systems
Proteomics
Installation and Maintenance Videos
Literature Library
Parts Information
Description, Pricing, and Availability
Illustrated Parts Breakdowns
Support Services - Finding
Warranty Status - Verifying
Please select a topic from this section below:
1050 Series LC Hardware
1090 Series LC Hardware
1100 Series LC Hardware
1200 Series LC Hardware
Capillary Electrophoresis (CE) Hardware
General LC Hardware
LC/MS Hardware
LC/MSD IonTrap
UV/Vis Hardware
Click a question below to see the answer:
Abnormal X axis values while acquiring from 35900E with 1200 LC
How does the ELSD fit in our Detector's portfolio?
Can I run gradients on the ELSD?
What are limitations when using the ELSD?
Can I use my standard solvents?
Can I use the ELSD for quantifying sample concentrations?
Are there any special requirements for using ELSD in my lab?
May I use air instead of nitrogen as a nebulization gas?
What do I need to consider when using the ELSD with other detectors?
Are there any special requirements for using ELSD in my lab?
How does the ELSD work?
What are the Specifications of 1200 Series ELSD?
How to troubleshoot ELSD Communication problem?
Which points are most important for better use of the ELSD?
P/N to upgrade my G1315D DAD or G1365D MWD or G1365C MWD SL to G1315C DAD SL
Supported RRLC modules (FW A.06.04/B.01.06) for Dionex Chromeleon 6.80 Driver
Can we use our existing 1100 Series LC systems with my new 1200 HPLC?
Do I need to upgrade or change my software if I add a Agilent 1200 Series module to my existing Agilent 1100 Series LC?
We are using 3rd party software (non-Agilent) to control our Agilent 1100 Series LC. Will I be able to add a new Agilent 1200 Series module to the system and continue to control the system with the 3rd party software?
Where I can find the site prep specifications for 1200 series HPLC?
What revision of Chemstation is supported with new 1200 series HPLC?
Can we use our existing 1100 series control module for 1200 series systems?
What revision of Agilent Chemstation, Ezchrom or Cerity is needed to support both Agilent 1100 Series and Agilent 1200 Series LC modules?
We just purchased a new 1200 Series high pressure binary pump SL. Can we use it with our Agilent 1100 Series LC modules?
Can I upgrade an Agilent 1100 Series LC module to Agilent 1200 Series?
Can 1200 LC will be supported by Chemstation version A.10.02 ?
The Plate Tray Base G2258-60011 is not recognized in my 1100 Auto Sampler and also 1200 series Micro Well Plate Sampler.The error reported is “Missing tray base”
What is the difference between 1200 VWD and 1200 VWD SL?
What are 1200 LC RIFD features?
What is DRC in 1200 LC ?
What are Agilent Intelligent Services offered for 1200 Series HPLC?
I have Waters Empower 1, Build 1154, with Service Pack F installed and Agilent Series 1200 HPLC.The Empower is expecting thermostat and won’t run. My Automated Liquid Sampler (ALS) model G1329A is running on A.05.11 firmware.
When controlling 1200 Series LC Instruments, the EZChrom Elite Agilent Instrument Controller (AIC) may run slowly or lock up
When I am Opening the Instrument Session after Autoconfig in my EZChrom Elite the Agilent Instrument Controller Locks up.
Why we need to use the Reference Wavelength in Diode Array Detector.
Why we need to use the Reference Wavelength in Diode Array Detector.
How To select Reference Wavelength in Diode Array Detector
What is Reverse Optics Design in Diode Array Detector.
What are recommendations for Agilent 1200 or Agilent 1100 Series quaternary and binary systems for ultra-fast LC?
When should I change rotor seal of my autosampler valve?
Why is my G4208A Instant Pilot is not recognizing some Kingston and Hama USB sticks.
Why is the Intensity test of the new lamp in my G1314A/B/C VWD on the Instant pilot failing,but I'm using a known good lamp?
What is Agilent 1200 Series Rapid Resolution LC (RRLC)?
How to Order a 1200 RRLC System?
How 1200 Series Well-Plate Sampler works?
How can the 1200 Series Systems and Modules be identified?
What firmware revisions I have to use with my Local Controllers G1323A/B andG4208A Instant Pilot?
What are Agilent 1200 Series Rapid Resolution Terminology and Application Ranges?
What are the Specifications Of Agilent 1200 Series Isocratic pump?
What are the Specifications of Agilent 1200 Series Binary Pump?
What are the Performance specifications of Agilent 1200 Series binary pump SL?
What are the Specifications of Agilent 1200 Series Quaternary Pump?
What are the specifications of Agilent 1200 Series Capillary Pump?
What are the Specifications of Agilent 1200 Series Nanoflow Pump?
What are the Specifications Agilent 1200 Series Preparative Pump?
What is UFLC?
What is HPLC - Chip Technology?
What is the benefit of using Precolumn Heating and post column cooling using Low Volume Dispersion heat exchanger kit in my Thermostated Column Compartment (TCC) model SL. (Model Number G1316B) on signal to Noise Ratio?
What are the new features and benefits of new Agilent 1200 series Thermostated Column Compartment (TCC) model SL. (Model Number G1316B)?
How many number of signals I can store along with spectrum from my Diode array Detector G1315C SL.What other signals can I store along with these signals and spectra.
What all the parameters that are stored by using RFID (Radio Frequency Identification Tags) from my Detector Flow cell and Detector Lamp. How they are help full to us.
I have a combination of 1100 and 1200 Lc. Can I up upgrade my chemstation to 32bit?
What are the Specifications of Agilent 1200 Series Instant Pilot?
What are the Performance Specifications of 1200 Series Dual Loop Autosampler?
What are the Performance Specifications of 1200 Series standard autosampler Valid when standard 100 µL metering head installed?
What are the Specifications of 1100/ 1200 Series Control Module?
What are the Performance specifications Agilent 1200 Series high performance autosampler SL?
What are the Performance Specifications of 1200 Series Micro Well-Plate Autosampler?
What are the Performance Specifications of 1200 Series Preparative Autosampler?
What are the performance Specifications of Agilent 1200 Series sample capacity extension?
How 'Agilent 1200 Series Sample Capacity Extension works?
What is Agilent 1200 Series Sample capacity Extension?
What types of 1200 Series Valve Solutions are available?
What is the Part Number of the kit to be used for Column Selection application with Agilent 1200 series System and what parts it consists of ?
What is the Part Number of Analytical Capillary kit used for Alternating Column Regeneration and what parts it consists of.
What is the Part Number of Preparative Capillary kit used for Alternating Column Regeneration and what parts it consists of ?
What is Sample Enrichment and how can I use Agilent 1200 series Valves to do Sample Enrichment?
What is Sample Stripping and How can I use Agilent 1200 series Valves to do Sample Stripping ?
How to use Agilent 1200 series Valves for column selection ?
How to use Agilent 1200 series Valves for Solvent selection?
When to Use a Vacuum Degasser in my new Binary Pump 1200 series SL G1312B SL
When to Use the Active Seal Wash Option and is it preinstalled in the Binary Pump SL?
Why I am getting 'ERROR Option Not Installed with G1312B pump (A.06.01)' in my Instant Pilot (firmware B.01.02/03/04) using 1200 Series SL model G1312B Pump which is added to my existing 1100 series ?
Why our 1200 series Variable Wavelength Detector is showing large negetive values like -300 to -600mAU after balancing.This is occuring intermittently?
Which is the right pump for RID and why?
Should I do OQ after an the equipment is moved to another place in the lab, to another lab in the same or in an other building ?
Is it a must to use manufacturer's OQ procedures only ?
How to choose the TEST SAMPLE for OQ?
Should each instrument of the same category have the same acceptance limit or should they be application or instrument specific?
How frequently should OQ be repeated?
My instrument has many modules and for OQ should I test each module or the system as a whole? ?
Can a vendor, user, or a 3rd party perform OQ Tests?
Should I do preventive maintenance before OQ?
Should I do OQ test before maintenance?
Should I do a complete OQ after an instrument repair
Should I do OQ after an instrument upgrade?
What are the Features and Benefits of CTC Analytics' HTC PAL High-throughput LC injection system?
What are the specifications of CTC Analytics' HTC PAL High-throughput LC injection system available through Agilent Technologies?
What's new in 1200 Series HPLC?
What is Agilent's Level 5 Instrument control?
The LED at the top right of a module is blinking orange. What could be the problem?
My LC analysis stopped & all the module LED became red. What could be the problem?
I am getting a high pressure error message. What should I do?
Liquid is leaking from the outlet ball valve. Re-tightening does not fix the problem. What will be the solution to this problem?
A 'PRESSURE SIGNAL MISSING' alarm occurs and the LED at the top right of the main unit turns red. What could be the problem?
A 'Motor-Drive Power' alarm occurs and the LED at the top right of the main unit turns red. What could be the problem?
A 'Motor Temperature' alarm occurs and the LED at the top right of the main unit turns red. What could be the problem?
An 'Initialization Failed' alarm occurs at the autosampler and the LED at the top right of the main unit turns red. What could be the problem?
The pressure increases after injection, the pump stops operating, and an error occurs. Also, the LED at the top right of the main unit turns red displaying pressure shutdown. What could be the problem?
An 'UV Ignition Failed' error occurs on the diode array detector, and the LED at the top right of the main unit turns red. What could be the problem?
What types of the Flow Cells are available to use with my Agilent 1200 series Diode Array Detector model G1315C SL?
Can I order LC Diagnostic Software?
What are the sections available in LC Diagnostic Software?
What is the use of the section 'Instrument configuration' in LC Diagnostic Software?
What is the use of the section 'Guided Diagnostic' in LC Diagnostic Software?
What is the use of the section 'Tests' in LC Diagnostic Software? What types of Tests are available?
What is the use of the section 'Calibration' in LC Diagnostic Software? What types of Calibrations are available?
What is the use of the section 'Tools' in LC Diagnostic Software? What can be done in this section?
What is the use of the section 'Status Report' in LC Diagnostic Software?
What are the features and benefits of the new HTC PAL HT LC Injection system for Agilent 1200 Series Rapid Resolution LC system?
What parts I need to order if I want like to connect bigger id tubing between solvent selection valve and active inlet valve of my binary pump? How to connect them?
What is the Benefit of 80Hz Data Acquisition Rate?
What are the equations to refer to while scaling up from analytical to preparative scale?
What is the consideration when choosing the right pump for a Refractive Index Detector(RID)?
How can I minimize the delay volume on my 1200 Series Liquid Chromatograph?
What is the recommended break-in or wear-in procedure when piston seals have been replaced?
My sample is injected but no data is collected. What may be the problem?
I would like to set up an injector program on my Agilent Autosampler. How do I do this?
Where can I find training, including e-seminar courses?
How do I get a copy of a Material Safety Data Sheet (MSDS) online?
I am used to reading pressure units in PSI rather than BAR. What is the conversion?
What does the color-coding mean on the outside of my flexible stainless steel capillary tubing?
How do I know whether or not the 1100/1200 Series fluorescence detector lamp is on?
Why won't my lamp ignite?
Why don't I get a red start line on the ChemStation Online Plot after an injection?
What is an 1100/1200 autosampler motor temperature error?
How do I reset the lamp hours on my 1100/1200 Diode Array, Multiple Wavelength or Variable Wavelength Detectors?
When should I replace my pump seals?
How do I know the flow cell of my UV detector is contaminated?
What solvents to be used to flush the HPLC lines to remove contaminants?
Why does the response linearity test fail after installing Data Browser Software and enabling AEV-report generation?
What are the specifications of 1200 Fraction collector?
What are specifications of 1200 Preparative Pump?
What happens to my fraction if it is not collected?
What are the safety feature available with 1200 HPLC system?
What are the available fraction collection modes for 1200 Fraction Collector?
What is evaluated linear and step gradient performance and retention time precision of the Agilent 1200 Series Rapid Resolution LC (RRLC)system?
What are the part numbers of needles and needle seat assemblies for the 1100/1200 Series LC Autosampler?
Can I order springs for my 1200 series Thermostatted column compartment front covers?
What is the approximate life time of Lamps used in my UV detectors?
How to Choose the Primary Flow in 1100/1200 series G1376A capillary pump?
How to set date & time on 1100/1200 series control module?
How to troubleshoot leak errors in 1100/1200 series systems?
How to Check the Status of 1100/1200 HPLC series with the Control Module?
How to set the Lamp ON or OFF in 1100/1200 control module after completion of a sequence (VWD/DAD)?
How to reset the Lamp On-time and the Number of Ignitions for 1100/1200 VWD/MWD using Control Module?
How to Set the contrast on the 1100/1200 control module?
How to replace the Piston Seals in the Pump Head of the 1100/1200 Series pumps?
How to replace the 1100/1200 Series Autosampler Metering Seal?
How to replace 1100/1200 Series Autosampler Valve Rotor Seal?
How to replace needle/needle seat assembly in 1100/1200 HPLC?
What is the procedure for 900ul Injection Upgrade Kit (G1363A) for1100/1200 Series Autosamplers?
What is the G1376A 1100/1200 Series Capillary Pump Purging/Priming Procedure?
What is the Optical Balance Procedure for the Unbalanced Diode Error on the G1362A Refractive Index Detector?
What is the recommended procedure for Flow Cell Flushing for the G1362A Refractive Index Detector?
How to replace 1100/1200 LC Manual Injection Valve Stator?
What is the procedure for Exchanging the complete EMPV or just the valve in capillary pump?
How to Enter Serial Numbers Into 1100/1200 Series HPLC Pump Modules using the 1200 series Instant Pilot?
How to Enter Serial Numbers Into 1100/1200 Series HPLC Autosampler Modules using the 1200 series Instant Pilot?
How to Enter Serial Numbers Into 1100/1200 Series HPLC TCC Modules using the 1200 series Instant Pilot?
How to Enter Serial Numbers Into 1100/1200 Series HPLC Detector Modules using the 1200 series Instant Pilot?
How to Perform the Electro Magnetic Proportional Valve Test on the G1376A 1100/1200 Series Capillary Pump?
What is Electro-Magnetic Proportioning Valve cleaning procedure for the 1100/1200 Series Pump?
What is 1100/1200 Series Multiple Wavelength Detector (MWD) DAC Test? What is the Procedure Using the ChemStation?
What are the new features of G1315D model 1200 Series Diode Array Detector and G1365D model 1200 Series Multiple Wavelength Detector ?
What are the softwares which are compatible with new G1315D model 1200 Series Diode Array Detector and G1365D model 1200 Series Multiple Wavelength Detector ?
What are the major difference between G1315C DAD (SL)/G1365C MWD(SL) and new G1315D DAD/G1365D MWD?
Is it possible to upgrade my G1315B DAD/G1365B MWD to new G1315D DAD/G1365D MWD?
How to create a step gradient on a 1100/1200 Quaternary LC?
How to create a step gradient on a 1200 Binary LC?
What are the new features added to Instant Pilot - G4208A and their benefits?
Are the revision A.05.11 of the Instant Pilot G4208A offer the same features as B.02.01? Can they be upgraded to new version?
How many methods and sequences can be stored with instant pilot G4208A?
Which memory stick should the customer use for method and sequence storage/transfer?
How the compliance is ensured with the instant pilot G4208?
Are the 1200 Series external valves are supported by instant pilot G4208?
Do I need an Instant Pilot G4208A for each 1200 LC system , as we do not use Agilent software?
How to set the Spectral Scan Acquisition in 1100/1200 series VWD?
What is the procedure for 1200 HPLC purging or priming?
How to perform the leak test for 1200 Isocratic Pump from the Control Module?
How to perform the pressure test for 1200 Isocratic Pump from the Control Module?
How to perform the leak test for 1200 Isocratic Pump from the ChemStation?
What is the Passivation procedure for Agilent HPLC?
How to perform the pressure test for 1200 Series Isocratic Pump from the ChemStation?
What care should be taken for the successful use of the 1200 Isocratic Pump.
Can we upgrade a 1100/1200 isocratic pump to quaternary pump?
What is the procedure for 1200 Quaternary pump Purging/Priming?
How to perform 1200 Binary Pump Leak test using ChemStation?
How to perform 1200 Binary Pump pressure test from the Control Module?
How to perform 1200 Binary Pump leak test from the Control Module?
What is the procedure for 1200 binary pump Purging/Priming?
My 1100/1200 G1314A/B VWD displays an error 'Calibration Failed Error'. What could be the problem?
My 1100/1200 G1314A/B VWD Holmium Oxide Test Failed. What could be the problem?
What is 1100/1200 VWD G1314A/B Holmium Test? How to perform it using ChemStation?
My 1100/1200 G1314A/B VWD displays an error 'Lamp Current Missing'. What could be the problem?
My 1100/1200 G1314A/B VWD displays an error 'Lamp Ignition Failed'. What could be the problem?
What is 1100/1200 VWD G1314A/B IntensityTest? How to perform it using ChemStation?
My 1100/1200 G1314A/B VWD displays an error 'Lamp Voltage Missing'. What could be the problem?
My 1100/1200 module displays an error 'Synchronization Lost'. What could be the problem?
My 1100/1200 module displays an error 'Timeout Error'. What could be the problem?
What is 1100/1200 VWD G1314A/B Wavelength Calibration Test? How to perform it using ChemStation?
How to perform G1321A FLD DAC Test using control module?
What are the advantages of having an Agilent Compliance Services?
What is Agilent Compliance Engine (ACE)?
What are the benefits to us by having Agilent Enterprise Edition Compliance services?
Why do we need Agilent Enterprise Edition Compliance services?
Can you provide brief on Agilent Enterprise Edition Compliance services?
Who determines the access level to our systems while using the Agilent Intelligent Services?
What is Agilent Intelligent Connections Plus?
What is Agilent Intelligent Connections?
What is Agilent Intelligent Repair?
What is Agilent Intelligent Services?
Is it secure to use Agilent Intelligent Services?
How to Select the Right Rotor Seal for manual manual 1200 HPLC injector?
What needs to be done to take care of DST changes on upgraded installations to ChemStation B.02.01 and higher?
What needs to be done to take care of DST changes on ChemStation B.01.0x, with or without ChemStore B.03.02?
What are the uses of 1200 series Valves and what are their specifications?
Use of 1200 Series LC DAD lamp in the VWD
How to use the FLD for ultra fast separations with the 1200 RRLC
How to use the FLD for ultra fast separations with the 1200 RRLC
Can I use 1200 Instant Pilot for controlling 1100 Series module?
