|
|
|
Instructions:
- Click the download link below for the hotfix that you want and save the file to a folder on your hard disk.
- Use a utility to extract the files from the zip archive file.
- Read the txt, pdf, or other document file that accompanies the utility for specific requirements and instructions.
- If you have any difficulty with this installation, contact your local Agilent office and ask for technical support.
Notes:
- Hotfixes are pre-released fixes that have not been incorporated into a service pack. Hotfixes have been tested to verify that the specific issue described has been fixed but not all are validated for all functionality that may be affected. Hotfixes are provided for those users encountering the specific issues described and are not intended for all users.
| Title |
Description |
Date Posted |
Download |
| Hotfix 37 |
This update addresses issue for Agilent GC installation where IQ fails due to the presence of msxml4.dll and msxml4r.dll files in the IQ. |
Friday, January 23, 2009 |
Download (79.7 KB) |
| Hotfix 38 |
This update addresses issue for CTC Autosampler installation where IQ fails due to the presence of msxml4.dll, msxml4a.dll and msxml4r.dll files in the IQ. |
Friday, January 23, 2009 |
Download (79.8 KB) |
| Hotfix 36 |
This update adds support for the following Agilent Instrument Controller versions: AIC 7800, AIC 5000 (firmware version 15.0.X), AIC Rev B (firmware version 14.0.X) |
Friday, January 09, 2009 |
Download (1.54MB) |
| HotFix 35 |
This update fixes a problem of chromatogram overlay, where user is unable to overlay data within active sequence after data file overlay restriction has been added by hotfix 32. |
Monday, October 27, 2008 |
Download (1.4 MB) |
| HotFix 18 |
software update is now available that resolves several issues with the Perkin Elmer AutoSystem XL GC instrument driver. |
Tuesday, September 16, 2008 |
Download (764 KB) |
| HotFix 29 |
A hotfix is now available that resolves an issue with custom parameters getting corrupted on some sequences when the method used in the sequence has duplicate IDs. |
Friday, September 05, 2008 |
Download (102 KB) |
| HotFix 32 |
This software update includes fixes for trace identity mismatch, and two other minor issues. It rolls up all Instrument Control client, AIC and Analysis Server hotfixes to date. |
Thursday, September 04, 2008 |
Download (2.5 MB) |
| HotFix 25 |
A sequence run on the Agilent 6890 Series GC cannot be aborted and remains waiting indefinitely for a trigger. |
Tuesday, August 26, 2008 |
Download (384 KB) |
| HotFix 26 |
GC Status remains at running when a sequence is cancelled |
Wednesday, August 13, 2008 |
Download (111 KB) |
| HotFix 33 |
Two files, msxml4.dll and msxml4r.dll are not OpenLab ICM product controlled files. As a result, the IQ fails for Agilent GC driver installation. |
Tuesday, August 12, 2008 |
Download (102 KB) |
| HotFix 34 |
Three files, msxml4.dll, msxml4a.dll and msxml4r.dll are not OpenLab ICM product controlled files. As a Result, the IQ fails for CTC Autosampler driver installation. |
Tuesday, August 12, 2008 |
Download (102 KB) |
| HotFix 28 |
The start and abort run for the Agilent LC 1100/1200 does not consistently work. The running status is not updated. [Issue 18913] The G1329B Agilent LC 1200 Autosampler module is not available on the instrument configuration page. [Issue 19080] |
Tuesday, August 05, 2008 |
Download (1.3 MB) |
| HotFix 24 |
Oracle and SQL Server database transaction logs grow to large sizes quickly when using OpenLAB ICM with OpenLAB ECM. OpenLAB Event Service stops sending commands and data from the database to the AIC. |
Friday, July 25, 2008 |
Download (514 KB) |
| HotFix 17 |
Shimadzu LC A/S Loop size discrepancy |
Friday, June 27, 2008 |
Download (262 KB) |
| HotFix 20 |
Waters Alliance LC control for ICM 3.3.1. |
Monday, June 09, 2008 |
Download (627 KB) |
| HotFix 12 |
This hotfix corrects the following issues: 16616: An Agilent LC method with an auto-sampler tray or column compartment temperature specified would sometimes not show the temperature in the Method Instrument Setup window when opening the method. The Method Instrument Setup view for the Auto-sampler was not being updated when opening the Instrument. The fix also applies for Column compartment on the Agilent LC. |
Monday, March 31, 2008 |
Download (215 KB) |
| Hotfix 04 |
This hot fix fixes the following problems: A user, who has NT Group access gets privilege errors [TT 15670] |
Thursday, July 19, 2007 |
Download (77.6 KB) |
| Hotfix 05 |
This hotfix fixes the following problems: Instruments can crash or hang on OpenLAB AICs causing sequences to stop running or to prevent instruments from connecting through an OpenLAB client. [TT 16050] |
Monday, July 09, 2007 |
Download (621 KB) |
| Hotfix 06 |
This hotfix fixes the following problems: Running sequence using Waters PDA hangs when network cable is disconnected from the AIC. [TT 15991] |
Thursday, June 28, 2007 |
Download (329 KB) |
| Hotfix 03 |
This hot fix fixes the following problems: Perkin Elmer GC problem setting split flow. |
Friday, May 18, 2007 |
Download (636 KB) |
| Hotfix 01 |
Sometimes When extracting files from result file package, result file integrity calculation fails. It results in an error message "...Result file Integrety validation failed. Integrity values do not match..." [Incident 36161] |
Wednesday, December 06, 2006 |
Download (534 KB) |
| AIC Hotfix 7 |
This is a rollup of fixes for the Microsoft RPC vulnerabilities MS06-040 and MS06-041 which affect the Windows XP Embedded operating system used by the OpenLAB AIC.
This will also fix a problem where the IQResults were not being generated properly after an AIC had been reset to factory. The IQResults would never show that anything had been installed.
NOTE: This update only applies to the AIC Revision B units for OpenLAB with the silver case using version 2.0.192 flash images. |
Tuesday, October 31, 2006 |
Download (281 KB) |
| AIC Hotfix 8 |
This is a rollup of fixes for the Microsoft RPC vulnerabilities MS05-039, MS05-041, MS05-045, MS05-047, MS06-007, MS06-008, MS06-011, MS06-030, MS06-040, and MS06-041 which affect the Windows XP Embedded operating system used by the OpenLAB AIC.
This will also resolve a problem where the IQResults were not being generated properly after an AIC had been reset to factory.
NOTE: This update only applies to the AIC Revision A units for OpenLAB with the black case using version 1.0.154e flash images. |
Tuesday, October 31, 2006 |
Download (1.2 MB) |
|
|