Agilent Life Sciences and Chemical Analysis Software Patches Download Area
The following software patches are available for download. Click on the patch you wish to download. At this point your browser will probably ask you what it should do with the file. Select "Save File" or similar option and download the patch to an empty subdirectory on your hard disk. For ZIP archives you will need PKUNZIP or similar utility to expand the ZIP file. Once the archive is expanded, follow the directions in the readme file.
Note: Only apply a patch to the particular revision of the Agilent software product for which it was intended. Applying patches to the incorrect revision of Agilent software may result in corruption of your application software and your data.
This patch fixes the following problems with the Easy-Access rev. A.05.01 software running on the LC or LC/MS ChemStation software:
--When the user is logging samples into a Wellplate Sampler (WPS) with two plates, they may encounter a situation where Easy-Access will tell them to place samples in a location on Plate 1 that is already occupied.
In addition, Patch 2 is cumulative in that it contains all the fixes in Patch 1:
--If while Easy-Access was being used on an Autosampler (ALS) with an External Tray and a vial that was being discarded (post-acquisition) was missing (e.g. the owner retrieved it), Easy-Access would report a Missing Vial error as if a pre-acquisition vial were missing.
--If during the initial setup for an acquisition an instrument error occurred that was quickly cleared (e.g. change in LC pump pressure), Easy-Access would pause the run and incorrectly report a missing vial.
--During acquisition with a CTC autosampler using a VT54 (54 2 ml vial plate), the sample position would seldom advance beyond the first vial plate.
--During acquisition with a CTC autosampler, the value for injection volume set in the Easy-Access user interface would not be used. Instead, it would use the ChemStation method injection volume.
--During acquisition with a CTC autosampler, overlapped injections would not work.
--When running Easy-Access samples as events, reports would never be printed.
Installation instructions are in Service Note G2725-28.txt.