|
|
|
Instructions:
- Click the download link below for the hotfix that you want and save the file to a folder on your hard disk.
- Use a utility to extract the files from the zip archive file.
- Read the txt, pdf, or other document file that accompanies the utility for specific requirements and instructions.
- If you have any difficulty with this installation, contact your local Agilent office and ask for technical support.
Notes:
- Hotfixes are pre-released fixes that have not been incorporated into a service pack. Hotfixes have been tested to verify that the specific issue described has been fixed but not all are validated for all functionality that may be affected. Hotfixes are provided for those users encountering the specific issues described and are not intended for all users.
| Title |
Description |
Date Posted |
Download |
| Software Update EE32159 |
This update addresses the Calculation of Spectral Max and Min lambda values. Have been adjusted to match the spectral Max/Min observable values within an 8nm range of the calculated value. |
Friday, February 13, 2009 |
Download (501 KB) |
| Software Update EE32154 |
Resolves an issue were the diagnostics function within the status window was disabled. |
Friday, January 09, 2009 |
Download (1.07 MB) |
| Software Update EE32152 |
Update resolves an issue with Multiple injection on the 6890+ GC with a PTV inlet and a second issue when switching front an back configurations on multiple 6890 on a GPIB bus. |
Tuesday, October 21, 2008 |
Download (598 KB) |
| HotFix 46 |
Methods containing a method report for instruments with a DAD/PDA will not automatically print at the end of the run. The Instrument Activity log shows that the current method has changed and has not been saved. The report is not printed. |
Wednesday, August 13, 2008 |
Download (233 KB) |
| HotFix 42 |
EZChrom Elite 3.2.1 hotfix for Alltech ELSD 2000. |
Monday, July 07, 2008 |
Download (61 KB) |
| HotFix 37 |
The hotfix corrects the following issue(s): 17665: A sequence acquired on an Agilent LC (Or other instrument types with multiple trays for on auto-sampler) in EZChrom Elite 3.2 will not show the vial information in the sequence table when the sequence is opened in EZChrom Elite 3.2.1. 16658: Sequence table fill down function only adds .dat to first data file. 16967: When the concentration override or custom parameters are used in the sequence, parameters in the method are overwritten such as pump parameters and triggers. 16902: When a run is aborted, a data file is still created and results of 0 are generated 16577: When a file is exported and has dots in the file name, then the portion of the file name between the first and last dot is dropped. 16459: The largest peak in a chromatgraph can give negative area in the Area Percent Export Report eventhough the peak has positive area 16400: When editting a running sequence, the user has to save the sequence twice before the sequence file is updated with the changes 16181 and 16020: Extend run option not available for instruments 17074: When using Advanced File Security, if an existing sequences is opened in an off-line instrument, changes to the sequence are not saved 16627: Running sequences cannot be updated directly on an EZServer This hotfix replaces Hotfix 35 and includes hotfixes 03, 09, 15, 22, 25, 26, 27, 30, 31 and 35. |
Monday, April 07, 2008 |
Download (991 KB) |
| HotFix 34 |
This hotfix corrects the following issue(s): 16547: The Agilent GC 7890 instrument driver in EZChrom Elite does not download the instrument configuration stored in configuration in EZChrom Elite to the instrument. With the hotfix, the instrument configuration information is downloaded to the instrument when the first connection is established. In EZChrom Elite client/server the Close Server operation must be performed for changes to take effect on the instrument. Close Server is available by right-clicking the instrument in the CSMain Window. |
Monday, March 10, 2008 |
Download (171 KB) |
| HotFix 31 |
The hotfix corrects the following issues: 16658: Sequence table fill down function only adds .dat to first data file. 16967: When the concentration override or custom parameters are used in the sequence, parameters in the method are overwritten such as pump parameters and triggers. 16902: When a run is aborted, a data file is still created and results of 0 are generated 16577: When a file is exported and has dots in the file name, then the portion of the file name between the first and last dot is dropped. 16459: The largest peak in a chromatgraph can give negative area in the Area Percent Export Report eventhough the peak has positive area 16400: When editting a running sequence, the user has to save the sequence twice before the sequence file is updated with the changes 16181 and 16020: Extend run option not available for instruments 17074: When using Advanced File Security, if an existing sequences is opened in an off-line instrument, changes to the sequence are not saved 16627: Running sequences cannot be updated directly on an EZServer Note: This hotfix replaces Hot fix 30, overrides Hot fix 35 and includes hotfixes 03, 09, 15, 22, 25, 26 and 27. |
Friday, February 01, 2008 |
Download (950 KB) |
| HotFix 32 |
Installation of EZChrom can disable sound in Windows Vista |
Friday, January 25, 2008 |
Download (20 KB) |
| Hotfix 20 |
This hot fix fixes the following problem: Incident Team Track #16345 - Problem getting to data path. |
Wednesday, October 31, 2007 |
Download (140 KB) |
| Hotfix 24 |
This hot fix includes and replaces hot fix 19. This hot fix fixes the following problem: Incident 16418 - DAD 1315C finishes in 1/3 the time - Same problem with MWD Isssue: When we do the regular run with Baseline run, the stop command for Baseline run was not sent properly so the Baseline run data was buffered in the instrument. As Baseline data gets buffered in the instrument, next run uses those data and finished in 1/3 of time. This happens only when we do the regular run with Baseline check run. Fix: Now EZChrom stops the Baseline run by sending the stop command properly. Fixed below issue too. When baseline monitor is selected, the system does something wrong in the timing/activities for the beginning of the run. The net result is that there is an extra 0.15 to 0.16 minutes of "data" that is being acquired or carried over from the baseline monitoring activity into the beginning of the run. This can be seen by the fact that the signal window in EE shows this "data" before the injection even occurs! |
Monday, October 22, 2007 |
Download (311 KB) |
| Hotfix 16 |
This hot fix fixes the following problems: Team Track Incident# 16478: Spectrum Report and Spectral Library |
Wednesday, September 19, 2007 |
Download (357 KB) |
| Hotfix 18 |
This hot fix fixes the following problem: Incident Team Track #16474 - Overlap sample prep does not work for Headspace |
Thursday, September 13, 2007 |
Download (223 KB) |
| Hotfix 17 |
This hot fix fixes the following problem: Incident Team Track # 16459 - Peak give negative area in Area% export report but positive elsewhere. (HF17) Incident Team Track # 16400 - Editing a running sequence (HF15) n/a - Support for RC .Net 2.0 (End of Data flag) (HF11) Incident Team Track # 16181 - Extend run does not work on Hitachi Elite instruments.(HF09) Incident Team Track # 16020 - Extend Run Not Possible with FRC (HF03) This hotfix replaces hotfix 11 and includes hot fixes 03, 09 and 15. |
Wednesday, September 05, 2007 |
Download (645 KB) |
| Hotfix 12 |
Limited support for Windows Vista Business for EZChrom Elite - Hotfix required for Dongle license keys on VISTA |
Tuesday, July 31, 2007 |
Download (2.5 MB) |
| Hotfix 01 |
This hot fix fixes the following problem: Incident TT# 15899 - Quick Launch Administration does not recognize domain groups when setting up Tasks. |
Wednesday, June 20, 2007 |
Download (56.2 KB) |
| Hotfix 4 |
This hot fix fixes the following problem: Incident 15832 (Team Track): Verification of acquisition date changes. |
Tuesday, June 19, 2007 |
Download (38.3 KB) |
|
|