To place an order or get more detailed ordering information including prices and availability, contact your local Agilent sales office or distributor (in the U.S. and Canada, call 1-800-227-9770; Option 2,1) or Request a Quote.
|
Description |
Product Number |
|
Capillary Flow Technology QuickSwap Option
For new Agilent GC/MSD systems that include a 6850 Series II, 6890, or 7890A GC |
G3440A Option 885 (7890A GC)
G1530N Option 885 (6890 GC)
G2630B Option 885 (6850 GC) |
|
Capillary Flow Technology QuickSwap Accessory
- QuickSwap mounts at the end of the MSD transfer line inside the GC oven
- Includes the Capillary Flow device and consumables
- Requires a regulated inert purge gas supply
- Pressure control device is required. If not present, order field upgrade: auxiliary EPC (G3394B for 6850 GC, G1570A for 6890 GC) or pneumatics control module (PCM) only
|
G3185B |
| QuickSwap Restrictors |
|
Capillary Flow Technology Deans Switch Option
- Some Capillary Flow components (for example, mounting hardware) is factory installed, but no system verification and no column installed.
- Any on-site Capillary Flow system verification, using columns and sample that the customer provides, must be confirmed with your Agilent service engineer and quoted separately.
|
G3440A Option 888(7890A GC)
G1530N Option 888(6890 GC) |
|
Capillary Flow Technology Deans Switch Accessory
Recommended on-site installation/verification to be quoted separately. |
G2855B |
|
Capillary Flow Technology Purged Effluent Splitter Option
- Some splitter components (e.g., mounting hardware) factory installed, but no system verification.
- Recommended on-site installation/verification to be quoted separately.
|
G3440A Option 889(7890A GC)
G1530N Option 889(6890 GC) |
|
Capillary Flow Technology Purged Effluent Splitter Accessory
Recommended on-site installation/verification to be quoted separately. |
G3180B |
|
Capillary Flow Technology 3-way Splitter with Make-up (typical application is to split column effluent to three detectors)
- Some splitter components (e.g,. mounting hardware) factory installed, but no system verification.
- Recommended on-site installation/verification to be quoted separately.
|
G3440A Option 890(7890A GC)
G1530N Option 890(6890 GC) |
|
Capillary Flow Technology 3-Way Splitter Accessory
Recommended on-site installation/verification to be quoted separately. |
G3183B |
Includes:
Hardware components for Capillary Flow switch or splitter
- Surfaces that contact the sample are deactivated to help minimize active sites
- Flow calculator software and documentation for flow calculations and required tubing lengths (English)
- Hardware installation instructions (English)
Requires:
- 7890A GC or 6890 GC with EPC
- Two detectors (monitor and analytical detectors)
- PCM if GC has only one inlet OR Auxiliary (Aux) EPC Module (acceptable, but PCM preferred--see Note below)
- Two columns (pre-column and analytical column)
- Windows 2000 or NT 4.0 (Service Pack 6), minimum 1024x768 pixel screen resolution and 16-bit color for Flow Calculator Software. 7890A GC requires NT4.0 (SP6)
Note: Both PCM and Aux EPC provide real-time ambient temperature compensation for retention time (RT) repeatability and stability. However, PCM also provides real-time atmospheric pressure compensation for even more precise RT repeatability and stability.
NOTE: Individual applications will vary but most switch systems will include two flow sources while most splitter systems will include two detectors.
Recommended:
- If a split/splitless inlet is not used, order Solvent Vapor Exit Accessory (Agilent part number G2399A) to accomplish back flushing
- Agilent ChemStation
- Automated sample introduction is recommended for best performance for reproducibility
|
Description |
Product Number |
|
Capillary Flow Technology GC x GC Flow Modulator Option
For new 7890A GC systems to enable comprehensive multidimensional chromatography |
G3440A Option 887
Also requires:
G3487A Checkout Kit
(order separately) |
|
Capillary Flow Technology GC x GC Flow Modulator Checkout Kit
Includes:
|
G3487A |
|
Capillary Flow Technology GCxGC Flow Modulator Accessory
For installation onto an existing 7890A GC system |
G3486A |
Includes:
Two columns:
122-5532 (30m x 0.25mm x 0.25um DB-5ms)
19091N-030 (5m x 0.25mm x 0.15um INNOWAX)
Requires:
G3440A 7890A GC, with:
SSL inlet
FID
Pneumatics Control Module
Automatic Liquid Injector
G2070BA SW (Ver B.03.02)
Not Included:
2D (GC x GC) data analysis software is not provided/supported by Agilent
Zoex Corporation sells and supports a 2D (GCxGC) data analysis software tested with 7890A GC system
For more information, see www.zoex.com/software-agilent.html
Exclusions:
Operation with MSD or SCD not currently supported
Cannot operate with other Agilent GC platforms such as 6890 GC, 6850 GC |