| Chromatogram |
Agilent J&W Phase |
Agilent Part No. |
| 1,3-Butadiene |
DB-624 |
128-1234 |
| 1,3 Butadiene |
HP-PLOT/AI2O3 |
19095P-S25 |
| 1,3-Butadiene, Crude |
GS-Alumina |
115-3532 |
| Acrylate
Impurities |
DB-200 |
125-2032 |
| Acrylate
Impurities |
DB-ProSteel |
145-0732 |
| Air, Carbon Dioxide, C1 and C2 |
GS-Q |
115-3432 |
| Argon/Oxygen Separation, Subambient |
GS-Molesieve |
115-3632 |
| Aromatics in Benzene |
HP-INNOWax |
19091N-216 |
| Aromatics in Finished Gasoline |
DB-1 |
122-1063 |
| Aromatics in Gasoline Proposed ASTM
Method D5769 |
HP-1 |
19091Z-236 |
| ASTM Method
D1945-96: Analysis of Natural Gas |
HP-PLOT Q |
19095P-QO4 |
| ASTM
Method D1945-96: Analysis of Natural Gas |
HP-1 |
19095Z-626 |
| ASTM
Method D1945-96: Extended Natural Gas Analysis |
HP-1 |
19091Z-216 |
| ASTM
Method D1945-96: Noble and permanent gas analysis |
HP-PLOT/MoleSieve |
19095P-MS5 |
| ASTM
Method D1946-90: Separation of synthetic gas sample |
HP-PLOT Q |
19095P-QO4 |
| ASTM
Method D2163-91: C4 Isomers including butadiene at low
levels |
HP-PLOT AI2O3
"KCI" |
19095P-K25 |
| ASTM
Method D2163-91: Analysis of propylene |
HP-PLOT AI2O3
"S" and "M" |
19095P-S25
19095P-M25 |
| ASTM
Method D2306-96: Universal Aromatic Solvent Analysis |
HP-INNOWax |
19091N-216 |
| ASTM
Method D3798:Test Method for Analysis of p-Xylene |
HP-INNOWax |
19091N-216 |
| ASTM
Method D2504-88:High speed alternative analysis of impurities in
ethylene using the Agilent micro GC |
HP-Molesieve
5A
HP-PLOT U
Alumina PLOT |
|
| ASTM
Method D2504-88: Analysis of ethylene |
HP-PLOT AI2O3
"S" |
19095P-S25 |
| ASTM
Method D2593: 1,3-Butadiene |
HP-PLOT AI2O3
"S" |
19095P-S25 |
| ASTM
Method D2593: Butadiene and Aromatics |
HP-PLOT Q |
19095P-QO4 |
| ASTM
Method D2712-91: Propylene calibration standard |
HP-PLOT AI2O3
"M" |
19095P-M25 |
| ASTM
Method D2712-91: Propylene calibration blend containing higher levels
of impurities |
HP-PLOT AI2O3
"M" |
19095P-M25 |
| ASTM
Method D2712-91: Analysis of propylene |
HP-PLOT AI2O3
"M and "M"" |
19095P-M25
19095P-S25 |
| ASTM
Method D2887-97: Simulated distillation with calibration
Extended
D2887: HP/AC alliance simulated distillation |
HP-1 |
19095Z-021 |
| ASTM
Method 3606: Separation of benzene, toluene, and MEK from other
potential interferences |
Methyl
silicone packed column
Micropacked TCEP column |
19096A-003
19096A-015 |
| ASTM
Method D3710-95: Chromatogram of retention and response factor
standard |
HP-1 |
190952-627 |
| ASTM
Method D3710-95: Chromatogram of retention and response factor
standard |
HP-1 |
|
| ASTM
Method D3710-95: Separation of C3-C6 components in Naphtha |
|
|
| ASTM
Method D3710-95: Separation of C5-C6 components in Calibration Blend |
|
|
| ASTM
Method D3710-95: Fast SimDis of Conventional Gasoline |
|
|
| ASTM
Method D4815-94: Ether gasoline blend |
|
|
| ASTM
Method D4815-94: Alcohol gasoline blend |
|
|
| ASTM
Method D5060: Determining Impurities in High-Purity Ethylbenzene |
HP-INNOWax |
19091N-216 |
| ASTM
Method D5134-92: Column Evaluation Sample |
HP-PONA |
19091N-216 |
| ASTM
Method D5314: Split Linearity Sample |
HP-PONA |
19091S-001 |
| ASTM
Method D5134: Naphtha |
HP-1 |
19091Z-530 |
| ASTM
Method D5134: Analysis of petroleum naphtha |
HP-PONA |
19091S-001 |
| ASTM
Method D5134-92: RFA Gasoline |
|
|
| ASTM
Method D5135-95: Impurities in styrene |
HP-INNOWax |
19091N-213 |
| ASTM
Method D5135-95: Impurities in styrene (fast analysis) |
HP-Wax |
19091X-241 |
| ASTM
Method D5135-95: Solvent analysis |
HP-Wax
HP-INNOWax |
19091X-133
19091N-133 |
| ASTM
Method D5441-93: MTBE Impurities |
HP-1 |
19091Z-530 |
| ASTM
Method D5501-94: Denatured fuel ethanol |
HP-1 |
19091Z-530 |
| ASTM
Method D5580-95: Separation of early-eluting
aromatics |
Column Kit |
190968-050 |
| ASTM
Method D5580-95: Separation of later-eluting
aromatics |
Column Kit |
190968-050 |
| ASTM
Method D5599-95: Oxygenates in gasoline |
HP-1 |
19091Z-236 |
| ASTM
Method D5623-94: Conventional gasoline quality control
sample |
HP-1MS |
19091S-713 |
| ASTM
Method D5623-94: FCC gasoline |
|
|
| ASTM Method
D1945-96: Analysis of Natural Gas |
HP-PLOT Q |
19095P-QO4 |
| ASTM
Method D1945-96: Analysis of Natural Gas |
HP-1 |
19095Z-626 |
| ASTM
Method D1945-96: Extended Natural Gas Analysis |
HP-1 |
19091Z-216 |
| ASTM
Method D1945-96: Natural Gas Analysis |
HP-PLOT/MoleSieve |
19095P-MS5 |
| ASTM
Method D1946-90: Analysis of Reformed Gas |
HP-PLOT/MoleSieve |
19095P-MS0 |
| ASTM
Method D1946-90: Separation of synthetic gas sample |
HP-PLOT Q |
19095P-QO4 |
| ASTM
Method D2163-91: C4 Isomers including butadiene at low
levels |
HP-PLOT AI2O3
"KCI" |
19095P-K25 |
| ASTM
Method D2163-91: Analysis of propylene |
HP-PLOT AI2O3
"S" and "M" |
19095P-S25
19095P-M25 |
| ASTM
Method D2306-96: Universal Aromatic Solvent Analysis |
HP-INNOWax |
19091N-216 |
| ASTM
Method D3798:Test Method for Analysis of p-Xylene |
HP-INNOWax |
19091N-216 |
| ASTM
Method D3798:Test Method for Analysis of p-Xylene |
HP-INNOWax |
19091N-216 |
| ASTM
Method D2504-88:High speed alternative analysis of impurities in
ethylene using the Agilent micro GC |
HP-Molesieve 5A
HP-PLOT U
Alumina PLOT |
|
| ASTM
Method D2504-88: Analysis of ethylene |
HP-PLOT AI2O3
"S" |
19095P-S25 |
| ASTM
Method D2593: 1,3-Butadiene |
HP-PLOT AI2O3
"S" |
19095P-S25 |
| ASTM
Method D2593: Butadiene and Aromatics |
HP-PLOT Q |
19095P-QO4 |
| ASTM
Method D2712-91: Propylene calibration standard |
HP-PLOT AI2O3
"M" |
19095P-M25 |
| ASTM
Method D2712-91: Propylene calibration blend containing higher levels
of impurities |
HP-PLOT AI2O3
"M" |
19095P-M25 |
| ASTM
Method D2712-91: Analysis of propylene |
HP-PLOT AI2O3
"M and "M"" |
19095P-M25
19095P-S25 |
| ASTM
Method D2887-97: Simulated distillation with calibration
Extended
D2887: HP/AC alliance simulated distillation |
HP-1 |
19095Z-021 |
| ASTM
Method 3606: Separation of benzene, toluene, and MEK from other
potential interferences |
Methyl silicone
packed column
Micropacked TCEP column |
19096A-003
19096A-015 |
| ASTM
Method D3710-95: Chromatogram of retention and response factor
standard |
HP-1 |
190952-627 |
| ASTM
Method D3710-95: Chromatogram of retention and response factor
standard |
HP-1 |
|
| ASTM
Method D3710-95: Separation of C3-C6 components in Naphtha |
|
|
| ASTM
Method D3710-95: Separation of C5-C6 components in Calibration Blend |
|
|
| ASTM
Method D3710-95: Fast SimDis of Conventional Gasoline |
|
|
| ASTM
Method D4815-94: Ether gasoline blend |
|
|
| ASTM
Method D4815-94: Alcohol gasoline blend |
|
|
| ASTM
Method D5060: Determining Impurities in High-Purity Ethylbenzene |
HP-INNOWax |
19091N-216 |
| ASTM
Method D5134-92: Determining Impurities in High-Purity Ethylbenzene |
HP-INNOWax |
19091N-216 |
| ASTM
Method D5134-92: Column Evaluation Sample |
HP-PONA |
19091N-216 |
| ASTM
Method D5314: Split Linearity Sample |
HP-PONA |
19091S-001 |
| ASTM
Method D5134: Naphtha |
HP-1 |
19091Z-530 |
| ASTM
Method D5134: Analysis of petroleum naphtha |
HP-PONA |
19091S-001 |
| ASTM
Method D5134-92: RFA Gasoline |
|
|
| ASTM
Method D5135-95: Impurities in styrene |
HP-INNOWax |
19091N-213 |
| ASTM
Method D5135-95: Impurities in styrene (fast analysis) |
HP-Wax |
19091X-241 |
| ASTM
Method D5135-95: Solvent analysis |
HP-Wax
HP-INNOWax |
19091X-133
19091N-133 |
| ASTM
Method D5441-93: MTBE Impurities |
HP-1 |
19091Z-530 |
| ASTM
Method D5501-94: Denatured fuel ethanol |
HP-1 |
19091Z-530 |
| ASTM
Method D5580-95: Separation of early-eluting
aromatics |
Column Kit |
190968-050 |
| ASTM
Method D5580-95: Separation of later-eluting
aromatics |
Column Kit |
190968-050 |
| ASTM
Method D5599-95: Oxygenates in gasoline |
HP-1 |
19091Z-236 |
| ASTM
Method D5623-94: Conventional gasoline quality control
sample |
HP-1MS |
19091S-713 |
| ASTM
Method D5623-94: FCC gasoline |
|
|
| Baseline Resolution of Air/Co, CO2
and Methane in a Natural Gas Sample |
HP-PLOT Q |
19095P-Q04 |
| BTEX |
HP-PLOT Q |
19095P-Q04 |
| BTEX
in Gasoline |
HP-1 |
19095Z-123 |
| Butadiene and Aromatics |
HP-PLOT Q |
19095P-Q04 |
| C1-C5 Hydrocarbons |
HP-PLOT / AI2O3 "S" |
19095P-S15 |
| C1-C6 Alkanes |
GS-GasPro |
113-4312 |
| Chiral Separation, a-Pinene Enantiomers
|
Cyclodex-B |
112-2532 |
| Denatured Fuel Ethanol - ASTM D5501 |
HP-1 |
19091Z-530 |
| Ethylene |
GS-Alumina |
115-3532 |
| Ethylene |
GS-Alumina |
115-3552 |
| Ethylene |
GS-Alumina/KCl |
115-3352 |
| Ethylene |
HP-PLOT/AI2O3 |
19095P-S25 |
| Ethylene Oxide Synthetic
Standard |
HP-PLOT Q |
19095P-Q04 |
| Extended Analysis (C1 to C10) |
HP-PLOT / AI2O3 |
19095P-S25 |
| Extended HP/AC Alliance Simulated
Distillation ASTM D2887 |
HP-1 |
19095Z-021 |
| Fast Analysis Reformate Gasoline |
HP-1 |
19091Z244 |
| Fast C1 to C10 Hydrocarbon
Separation |
HP-PLOT / AI2O3 |
19095P-M23 |
| Fast C1-C8 in Naphtha - ASTM D5134 |
HP-1 |
19091Z-441 |
| Fast Styrene Analysis |
HP-Wax |
19091X-241 |
| Finished Gasoline |
HP-1 |
19091Z-530 |
| Gas Oil, Reference |
DB-2887 |
125-2814 |
| Gasoline, Unleaded |
DB-Petro100 |
122-10A6 |
| Gasoline, Unleaded |
DB-1 |
127-1046 |
| Gasoline, Unleaded |
DB-Petro100 |
122-10A6 |
| Gasoline, Unleaded |
DB-VRX |
124-1534 |
| HP/AC Alliance Simulated Distillation
ASTM D2887 |
HP-1 |
19095S-100 |
| HP/AC Alliance Simulated Distillation
ASTM D3710 |
HP-1 |
19095Z-627 |
| Hydrocarbons |
DB-Petro100 |
122-10A6 |
| Hydrocarbons, Aromatic |
GS-GasPro |
113-4332 |
| Hydrocarbons C1-C5 Using an HP-PLOT
Q Column |
HP-PLOT Q |
19095P-Q04 |
| Hydrocarbons, Extended Analysis |
GS-Alumina |
115-3532 |
| Impurities in Ethylbenzene - ASTM
D5060 |
HP-INNOWax |
19091N-216 |
| Purity of
o-Xylene |
HP-INNOWax |
19091N-216 |
| Impurities of
p-Xylene - ASTM D3798 |
HP-INNOWax |
19091N-216 |
| Impurities in Styrene: ASTM D5135 |
HP-INNOWax |
19091N-213 |
| Light Hydrocarbons |
HP-PLOT / AI2O3 "S" |
19091P-S33 |
| Light Sulfur Compounds |
HP-1 |
19095Z-626 |
| MAPP Gas |
GS-GasPro |
113-4332 |
| Mercaptans |
GS-Q |
115-3432 |
| Mercaptans |
GS-GasPro |
113-4332 |
| Mercaptans |
GS-GasPro |
113-4332 |
| MTBE, Crude |
DB-Petro100 |
122-10A6 |
| MTBE Impurities ASTM Method 5441 |
HP-1 |
19091Z-530 |
| Naphtha |
HP-1 |
19091Z-530 |
| Naphtha, Petroleum |
DB-1 |
121-1043 |
| Natural Gas |
HP-1 |
19095Z-626 |
| Natural Gas |
HP-PLOT Q |
19095P-Q04 |
| Natural Gas Analysis |
GS-Q |
115-3432 |
| Natural Gas (Hydrocarbon) |
HP-PLOT / AI2O3 |
19095P-S21 |
| Natural Gas (Hydrocarbons) |
PONA |
19091S-001 |
| Noble Gases |
GS-Molesieve |
115-3632 |
| Noble Gases |
HP-PLOT / Molesieve |
19095P-MSO |
| n-Paraffin Standard |
DB-HT Sim Dis |
145-1001 |
| Odor Additives -Separation of
Mercaptans and other Sulfur Compounds on HP-PLOT Q |
HP-PLOT Q |
19095P-Q04 |
| Olefins to C5 |
HP-PLOT Q |
19095P-Q04 |
| Oxygen/Argon Separation, Subambient |
GS-Molesieve |
115-3632 |
| Oxygenates in Gasoline |
HP-1 |
19095Z-123 |
| Oxygenates in Gasoline ASTM Method
D5599 (GC-OFID) |
HP-1 |
19091Z-236 |
| Oxygenates in Hydrocarbon Sample |
HP-PLOT Q |
19095P-Q04 |
| Permanent Gases |
HP-PLOT / MoleSieve |
19091P-MS4 |
| Permanent Gases |
GS-Molesieve |
115-3632 |
| Permanent
Gases in Hydrocarbon Blend |
GS-GasPro |
113-4362 |
| Permanent
Gases in Refinery Gas |
GS-GasPro |
113-4362 |
| Permanent Gases |
GS-CarbonPLOT |
113-3133 |
| Petroleum Naphtha |
DB-1 |
121-1043 |
| Petroleum Wax |
DB-1 |
123-1012 |
| Petroleum Wax |
HP-5 |
19091J-015 |
| Polyethylene |
DB-1 |
125-1011 |
| Polymer Additives |
HP-1 |
19091Z-012 |
| Polymer Additives |
HP-35 |
19091G-013 |
| Polypropylene Additives |
HP-1 |
19091Z-411 |
| Polywax 500 |
HP-1 |
19095Z-023 |
| PONA Mix Specified by AFNOR
Method 2 |
DB-Petro50 |
128-1056 |
| Propylene |
GS-Alumina |
115-3552 |
| Propylene |
HP-PLOT/AI2O3 |
19095P-S25 |
| Propylene impurities |
GS-GasPro |
113-4332 |
| Propylene impurities |
GS-Alumina/KCl |
115-3352 |
| Reference Crude Oil |
DB-HT Sim Dis |
145-1001 |
| Reference Gas Oil |
DB-2887 |
125-2814 |
| Reference Gas Oil |
HP-1 |
19095Z-023 |
| Refinery Gas |
HP-1 |
19091Z-530 |
| Refinery Gas |
HP-PLOT / AI2O3 |
19095P-S25 |
| Refinery Gas
Sample (Synthetic) |
GS-Alumina |
115-3552 |
| Refinery Gas (Hydrocarbon) |
PONA |
19091S-001 |
| Reformate Gasoline Analysis |
HP-INNOWax
HP-Wax
HP-Wax |
19091N-213
19091X-241
19091X-241 |
| SFE of Diesel OIL in Soil |
HP-50+ |
19095L-023 |
| SimDis of Diesel Fuel |
HP-1 |
19091Z-012 |
| SimDis of Kerosene |
HP-1 |
19091Z-012 |
| Simulated Distillation |
DB-2887 |
125-2814 |
| Separation of Refinery Gas Sample |
HP-PLOT / AI2O3 "S" |
19095P-S25 |
| Styrene Analysis |
HP-Wax |
19091X-241 |
| Subambient Argon/Oxygen Separation |
GS-Molesieve |
115-3632 |
| Sulfur Compounds in Hexane |
HP-PLOT Q |
19095P-Q04 |
| Sulfur Compounds in Naphtha |
PONA |
19091S-001 |
| Sulfur Compounds in Natural Gas-
Synthetic Mixture |
HP-1 |
19091Z-205 |
| Sulfur
Compounds in Propylene |
GS-GasPro |
113-4332 |
| Sulfur Gases |
HP-1 |
19095Z-121 |
| Sulfur
Gas Analysis in Light Hydrocarbon Streams |
GS-Q |
113-3432 |
| Sulfur
Gas Analysis in Light Hydrocarbon Streams |
GS-GasPro |
113-4332 |
| Sulfur Hexafluoride |
GS-Molesieve |
115-3632 |
| Sulfur Odorants in Natural Gas |
HP-1 |
19095Z-626 |
| Total Recoverable Petroleum
Hydrocarbons (TPHs) Diesel Range |
HP-5 |
19091S-002 |
| Transformer Oil Gas |
HP-PLOT Q |
19095P-Q04 |
| Universal Aromatics Method |
HP-INNOWax |
19091N-216 |
